View source for User:Fox/wip

== Definitions ==

=====<div {{Def link}}>texture</div>=====
<span {{Def element}}>texture <i><tilenum> { ... }</i></span>

Defines a Hightile texture to replace an ART-file tile. <i><tilenum></i> may be a number, or a defined label.

Example:

 texture 3586 {
   pal 0 { file "mymod/tree.png" }
   pal 21 { file "mymod/tree_red.png" xscale 2.0 yscale 2.0 alphacut 0 nodownsize nocompress }
   glow { file "mymod/tree_light.png" }
   detail { file "mymod/plant_texture.png" scale 0.5 }
 }

The brace-enclosed block may contain these instructions:

:<span {{Def subelement}}>pal <i><palnum> { ... }</i></span>

:Replaces the palette <i><palnum></i>. If a palette has no pal definition palette 0 definition will be used. Tint will not be used on palettes defined with this instruction.

:The brace-enclosed block may contain these instructions:

::<span {{Def subelement}}>file <i><filename></i></span> (or <span {{Def subelement}}>name <i><filename></i></span>)

::Defines which texture file to use. File may be any PNG, JPG, TGA, BMP, GIF or PCX file. This instruction must be supplied.

::<span {{Def subelement}}>alphacut <i><cutoff-value></i></span>

::Sets the level of transparency at which a pixel in the texture is considered opaque. Pixels with more transparency than the cut-off are not drawn to the screen when rendered. The default setting is 0.32, which is just below the 33% transparency level of Build. If your texture has areas that are more transparent than the default, you can lower the cut-off level to preserve that detail.

::<span {{Def subelement}}>nocompress</span>

::Prevents the texture from being compressed using S3TC if texture compression is enabled.

::<span {{Def subelement}}>nodownsize</span>

::Prevents the texture from being downsized.

::<span {{Def subelement}}>xscale <i><value></i></span><br />
::<span {{Def subelement}}>yscale <i><value></i></span>

::Sets the scale of the hightile texture in relation to the original texture. A <i><value></i> of 1.0 makes it the same size, higher makes it cover more then the original tile and smaller makes it cover a smaller area. <b>xscale</b> (aka <b>scale</b>, <b>detailscale</b>, <b>intensity</b>) sets the horizontal scale and <b>yscale</b> sets the vertical scale.

:<span {{Def subelement}}>detail <i>{ ... }</i></span>

:Defines a [[Detail_mapping|detail texture]] for the texture. The brace-enclosed block may contain these instructions:

::<span {{Def subelement}}>file <i><filename></i></span>

::Specifies which detail texture file to use. File may be any PNG, JPG, TGA, BMP, GIF or PCX file. This instruction must be supplied.

::<span {{Def subelement}}>scale <i><value></i></span>

::<i><value></i> is a positive floating-point value that'll determine how much your detail map should repeat on your diffuse map (if you want your detail map to repeat five times, use a 1/5 scale : 0.2).

:<span {{Def subelement}}>glow <i>{ ... }</i></span>

:Defines a [[Glow_mapping|glow map]] for the texture. The brace-enclosed block may contain these instructions:

::<span {{Def subelement}}>file <i><filename></i></span>

::Specifies which glow map file to use. This instruction must be supplied.

=====<div {{Def link}}>tint</div>=====
<span {{Def element}}>tint''' <i>{ ... }</i></span>

Defines a Hightile texture tint to simulate palette effects normally used on ART-file tiles.

Example:

 tint { pal 1 red 127 green 127 blue 255 flags 0 }
 tint { pal 2 green 127 blue 127 }

The brace-enclosed block may contain these instructions:

:<span {{Def subelement}}>pal''' <i><palnum></i></span>

:The palette number the tint applies to.

:<span {{Def subelement}}>'''red''' <i><value></i></span> (or <span {{Def subelement}}>'''r''' <i><value></i></span>)<br />
:<span {{Def subelement}}>'''green''' <i><value></i></span> (or <span {{Def subelement}}>'''g''' <i><value></i></span>)<br />
:<span {{Def subelement}}>'''blue''' <i><value></i></span> (or <span {{Def subelement}}>'''b''' <i><value></i></span>)

:Specifies a color component value, in the range of 0 to 255. Unspecified components are assumed to be 255 and any out of range values are clamped to the maximum or minimum as appropriate.

:<span {{Def subelement}}>'''flags''' <i><flags></i></span>

:Specifies any special processing effects to use for the tint. The value of flags may be the sum of any of these values:

:0 = no effects<br />
:1 = convert to greyscale<br />
:2 = invert colors

== Test ==
== Test ==