Texture (DEF): Difference between revisions

Revision as of 04:57, 23 February 2020

This page is under construction.
Please help review and edit this page.

texture <tilenum> { [...] }

Defines a Hightile texture to replace an ART-file tile. <tilenum> may be a number, or a defined label.

Tokens

pal <palnum> { [...] }

Replaces the palette <palnum>. If a palette has no pal definition palette 0 definition will be used. Tint will not be used on palettes defined with this instruction.

detail { [...] }

Defines a detail texture for the texture.

glow { [...] }

Defines a glow map for the texture.

specular { [...] }

DESCRIPTION

normal { [...] }

DESCRIPTION

file <filename> (or name)

Defines which texture file to use. File may be any PNG, JPG, DDS, TGA, BMP, GIF or PCX file. This instruction must be supplied.

alphacut <value>

Sets the level of transparency at which a pixel in the texture is considered opaque. Pixels with more transparency than the cut-off are not drawn to the screen when rendered. The default setting is 0.32, which is just below the 33% transparency level of Build. If your texture has areas that are more transparent than the default, you can lower the cut-off level to preserve that detail.

nocompress

Prevents the texture from being compressed using S3TC if texture compression is enabled.

nodownsize

Prevents the texture from being downsized.

forcefilter

DESCRIPTION

artquality <value>

DESCRIPTION

xscale <value> (or detailscale / scale / intensity)

yscale <value>

Sets the scale of the hightile texture in relation to the original texture. A <value> of 1.0 makes it the same size, higher makes it cover more then the original tile and smaller makes it cover a smaller area. xscale (aka scale, detailscale, intensity) sets the horizontal scale and yscale sets the vertical scale.

orig_sizex <value>

orig_sizey <value>

DESCRIPTION

specpower <value> (or specularpower / parallaxscale)

DESCRIPTION

specfactor <value> (or specularfactor / parallaxbias)

DESCRIPTION

Examples

texture 3586 {
  pal 0 { file "mymod/tree.png" }
  pal 21 { file "mymod/tree_red.png" xscale 2.0 yscale 2.0 alphacut 0 nodownsize nocompress }
  glow { file "mymod/tree_light.png" }
  detail { file "mymod/plant_texture.png" scale 0.5 }
}

@@ Line 1: / Line 1: @@
-'''texture''' <tilenum> { [...] }
+{{Under construction}}
+<span {{code}}>'''texture''' <tilenum> { [...] }</span>
 Defines a Hightile texture to replace an ART-file tile. <tilenum> may be a number, or a defined label.
@@ Line 5: / Line 7: @@
 == Tokens ==
-'''pal''' <palnum> { [...] }
+<span {{code}}>'''pal''' <palnum> { [...] }</span>
 Replaces the palette <palnum>. If a palette has no pal definition palette 0 definition will be used. Tint will not be used on palettes defined with this instruction.
-The brace-enclosed block may contain these instructions:
+<span {{code}}>'''detail''' { [...] }</span>
+Defines a [[Detail_mapping|detail texture]] for the texture.
+<span {{code}}>'''glow''' { [...] }</span>
+Defines a [[Glow_mapping|glow map]] for the texture.
+<span {{code}}>'''specular''' { [...] }</span>
+DESCRIPTION
+<span {{code}}>'''normal''' { [...] }</span>
+DESCRIPTION
-: {| cellpadding="0" cellspacing="0" border="0"
+:: <span {{code}}>'''file''' <filename> (or '''name''')</span>
-| valign="top" | '''file''' <filename>
-| width="20px" |
-| valign="top" | (or '''name''')
-|-
-|}
-: Defines which texture file to use. File may be any PNG, JPG, DDS, TGA, BMP, GIF or PCX file. This instruction must be supplied.
+:: Defines which texture file to use. File may be any PNG, JPG, DDS, TGA, BMP, GIF or PCX file. This instruction must be supplied.
-: '''alphacut''' <cutoff-value>
+:: <span {{code}}>'''alphacut''' <value></span>
-: Sets the level of transparency at which a pixel in the texture is considered opaque. Pixels with more transparency than the cut-off are not drawn to the screen when rendered. The default setting is 0.32, which is just below the 33% transparency level of Build. If your texture has areas that are more transparent than the default, you can lower the cut-off level to preserve that detail.
+:: Sets the level of transparency at which a pixel in the texture is considered opaque. Pixels with more transparency than the cut-off are not drawn to the screen when rendered. The default setting is 0.32, which is just below the 33% transparency level of Build. If your texture has areas that are more transparent than the default, you can lower the cut-off level to preserve that detail.
-: '''nocompress'''
+:: <span {{code}}>'''nocompress'''</span>
-: Prevents the texture from being compressed using S3TC if texture compression is enabled.
+:: Prevents the texture from being compressed using S3TC if texture compression is enabled.
-: '''nodownsize'''
+:: <span {{code}}>'''nodownsize'''</span>
-: Prevents the texture from being downsized.
+:: Prevents the texture from being downsized.
-: '''xscale''' <value>
+:: <span {{code}}>'''forcefilter'''</span>
-: '''yscale''' <value>
-: Sets the scale of the hightile texture in relation to the original texture. A <value> of 1.0 makes it the same size, higher makes it cover more then the original tile and smaller makes it cover a smaller area. '''xscale''' (aka '''scale''', '''detailscale''', '''intensity''') sets the horizontal scale and '''yscale''' sets the vertical scale.
+:: DESCRIPTION
-'''detail''' { [...] }
+:: <span {{code}}>'''artquality''' <value></span>
-Defines a [[Detail_mapping|detail texture]] for the texture. The brace-enclosed block may contain these instructions:
+:: DESCRIPTION
-: '''file''' <filename>
+:: <span {{code}}>'''xscale''' <value></span> (or '''detailscale''' / '''scale''' / '''intensity''')<br />
+:: <span {{code}}>'''yscale''' <value></span>
-: Specifies which detail texture file to use. File may be any PNG, JPG, DDS, TGA, BMP, GIF or PCX file. This instruction must be supplied.
+:: Sets the scale of the hightile texture in relation to the original texture. A <value> of 1.0 makes it the same size, higher makes it cover more then the original tile and smaller makes it cover a smaller area. '''xscale''' (aka '''scale''', '''detailscale''', '''intensity''') sets the horizontal scale and '''yscale''' sets the vertical scale.
-: '''scale''' <value>
+:: <span {{code}}>'''orig_sizex''' <value></span><br />
+:: <span {{code}}>'''orig_sizey''' <value></span>
-: <value> is a positive floating-point value that'll determine how much your detail map should repeat on your diffuse map (if you want your detail map to repeat five times, use a 1/5 scale : 0.2).
+:: DESCRIPTION
-'''glow''' { [...] }
+:: <span {{code}}>'''specpower''' <value></span> (or '''specularpower''' / '''parallaxscale''')
-Defines a [[Glow_mapping|glow map]] for the texture. The brace-enclosed block may contain these instructions:
+:: DESCRIPTION
-: '''file''' <filename>
+:: <span {{code}}>'''specfactor''' <value></span> (or '''specularfactor''' / '''parallaxbias''')
-: Specifies which glow map file to use. This instruction must be supplied.
+:: DESCRIPTION
 == Examples ==

Texture (DEF): Difference between revisions

Revision as of 04:57, 23 February 2020

Tokens

Examples

Navigation menu

Search