Scripting

EDuke32 Scripting

Scripting · Full command list (alphabetized · categorized) · Event list · Structure members

About This Guide

Intro

This guide will get you started with the basic aspects of EDuke32's commands -- those which set it apart from vanilla DN3D. This guide assumes both that the reader comprehends and understands the basic CON system as was seen in Duke Nukem 3D 1.3D/1.5, and that the reader is familiar with a few basic programming concepts.

CON Basics

• full command list
  • alphabetized
  • categorized

If you are not already familiar with the default commands, the authors of this guide recommend the following guide, imported into the EDukeWiki for your convenience:

• Con FAQ 4.2 by Jonah Bishop (note: some sections have been shuffled around a bit by TX)

Another good source of basic information is the following FAQ:

• Con Editing Information v1.3 by James Ferry

CON Mechanics

Gamevars

Overview

• gamevars

Gamevars were introduced in WWII GI and remain the single most important aspect of the new commandset. Everything that sets EDuke32 scripting apart from regular Duke Nukem 3D scripting revolves around gamevars. Gamevars work similarly to integer variables in various programming languages, allowing the user to store, manipulate, and compare various information. Prior to gamevars, the only usable alternatives were manipulations of inventory item counters and move commands.

Types

There are three basic types of gamevar, each type storing a signed 32-bit fixed-point integer. The three basic types are as follows:

• Global variable: If a variable is declared as global, there is only one copy of it which may be accessed by any actor in the game.

For example:

  gamevar shots_fired 0 0 // gamevar declarations must not occur inside states, events, or actor code

This line tells the game to create a variable named "shots_fired" which is initialized to 0. But wait -- what's the second 0 for? If you're asking yourself this question, go back and read the actual page on gamevars. Now that you know that gamevars have flags which must be declared along with the var's name and value, let's continue.

So, we've created a gamevar. Now what? For this example, we'll find the places in the GAME.CON code where the command "shoot SHOTSPARK1" occurs, and in each instance add the line "addvar shots_fired 1", so that in each case it looks like this:

  shoot SHOTSPARK1
  addvar shots_fired 1 // increments the counter

This will make the shots_fired var increment each time an enemy fires a SHOTSPARK1 projectile.

• Per-player variable: If a variable is declared as per-player, there is one copy of it for each player in the game, meaning that the variable is set independently for each player. If a player performs an action that triggers a per-player variable change within an event or the APLAYER actor code, it will only change for the player that initiated that action. If an actor changes a per-player variable, it will change for the closest player to the actor what changed it. You can use the setplayervar command to set a per-player var for a particular player who is not the closest one, but this is only necessary in multiplayer games (and even then it is seldom necessary). In single player games, there is little practical difference between a global gamevar and a per-player variable.

• Per-actor variable: If a variable is declared as per-actor, then there is separate copy of it for each sprite in the game. That means that every monster, projectile, player, decorative sprite -- pretty much anything in the game that isn't a wall or sector -- has its own copy of the variable. This is useful if you want to have actors other than the player store information for more than one tic. For example, suppose you want each monster to keep track of how many bullets it has fired:

  gamevar shots_fired 0 2

This line tells the game that there is a variable named "shots_fired" which is initialized to 0 ( the 0 ) and is per-actor( the 2 ). With the gamevar declared, you could then add code to the monsters to increment the var when firing shots (just like in the example above for global gamevars). Since the gamevar is per-actor, the same code would now increment the variable separately for each monster.

There are also some pre-defined gamevars and special constantly updated gamevars which should only be used in certain ways.

Use and manipulation

Custom variables, or "gamevars" are declared with the gamevar command.

The syntax for defining a gamevar is:

gamevar <varname> <value> <flags>

You may use upper or lowercase letters for <varname>. EDuke32 is case-sensitive, so a var named "EXAMPLE1" is different from "example1." Variable names should not begin with a digit.

The <value> of the gamevar may be positive or negative and must be a whole number.

The <flags> may be set to either 0 (global), 1 (per-player), or 2 (per-actor).

• ifvar conditions
• gamevar operators

Members of game structures

Overview

• full list of structure members

EDuke32, like prior EDuke iterations, gives you access to game structures--basic elements of the game such as the player, sprites, walls, and sectors--and their predefined property variables, or members.

Actor / Sprite

• members of the sprite and hittype structures

You can control the sector structures with the getactor and setactor commands.

Objects in the game world, such as monsters, missiles, bits of debris, and so on, are referred to as "sprites" (because they are typically rendered as 2D pictures). Sprites that execute code are usually referred to as "actors". Every sprite has its own data structure containing all of the member elements in the list linked to above. Various original CON commands, such as "cstat", "spritepal", "sizeat", etc. work by changing values in the sprite structure of the actor executing the command. These structure members can be modified directly in an EDuke32 script by using the setactor command. Commands like setactor enable us to modify every member of the structure, even those that could not be accessed with the original scripting system. See getactor and setactor to see how these commands are used.

Player

• members of the player structure

You can control the sector structures with the getplayer and setplayer commands.

The members of the player structure are controlled using the getplayer and setplayer commands. The player structure members deal with properties unique to the player which are not shared with other actors. These include variables associated to the players weapons, inventory items, special animations, jumping counters, etc. See the complete list of members of the player structure for details. This example shows how to get a member of the player structure into a variable, check its value, then alter a member of the player structure accordingly.

Sector

• members of the sector structure

You can control the sector structures with the getsector and setsector commands.

Wall

• members of the wall structure

You can control the wall structures with the getwall and setwall commands

Game configuration

• members of the userdef structure

The userdef structures are controlled with the getuserdef and setuserdef commands.

Player input

• members of the input structure

The input structures are controlled with the getinput and setinput commands.

Tsprite

• members of the tsprite structure

The tsprite structures are controlled with the gettspr and settspr commands.

Events

Overview

EDuke32 provides both an object-oriented and an event-oriented interface to the game's internal workings. As you already know, the object-oriented part of Duke is the actor system -- in contrast to that, we'll be talking about the event-oriented portion in this section. As the name suggests, an event is a block of code that is triggered when a certain event in the game happens. Events in the game are triggered internally whenever a certain point in the code is reached.

Events are a key component in the manipulation of the game. Using events, we can do a variety of things such as intercept keypresses, draw to the screen (more on this later), redefine what a player does when certain actions are executed, et cetera.

Event use

• events list

Using an event is very easy — similar to the actor or state primitives, onevent is the primitive used to start the definition of a block of code to be associated with one of the events. Furthering the similarity, onevent must be terminated by the equivalent of an enda or an ends, an endevent.

The following example of event code will cause the player to have a full first aid kit every time the inventory is reset (e.g. when the player starts a game):

   onevent EVENT_RESETINVENTORY
   setplayer[THISACTOR].firstaid_amount 100
   endevent

Drawing to the screen

The ability to properly draw to the screen is a huge improvement over the hackish abominations involving quotes and unused characters that we were forced to endure when using 1.3D and 1.5. There are several different drawing commands available, ranging in functionality from drawing graphics to the screen to printing text stored in quotes (see the section on string manipulation for more information).

Drawing commands

• rotatesprite
• gametext
• minitext
• digitalnumber

Custom projectiles

Overview

EDuke32 adds the ability to create new projectiles in addition to the default types. A few basic types exist (shorthand: melee, hitscan (bullets), and visible projectiles like RPGs) which can be used to create a nearly infinite variety of weapon types and even some entirely new effects, such as new types of debris, gibs, clouds of billowing smoke, et cetera.

Defining custom projectiles

• defineprojectile

The input structures are controlled with the getprojectile, getthisprojectile and setprojectile, setthisprojectile commands.

Projectiles are defined via the defineprojectile command. The syntax for this command is:

defineprojectile <tilenum> <function> <value>

String manipulation

• string manipulation

Strings (lines of text) are called "quotes" in Duke Nukem 3D. String manipulation consists of some simple copying and concatenation commands, as well as the ability to print the text to the screen.

Scripting Guidelines

When scripting, there are guidelines that you should follow in order to keep your code clean, concise, correct, and optimized.

Design

• If you are making a mini-mod, consider creating a CON mutator.

Formatting

• Always comment your code! It will help you and other later, and it will also help the code straightforward.
• Indentation is key. Every level of code ("if" and "switch" statements, loops, and delimited blocks) should be indented with four spaces. TAB characters should be avoided.
• Labels, gamevars, actions, moves, and AIs are case-sensitive and cannot start with numbers. Do not use the same names as CON commands.
• if<something> nullop else (...) is a common construction used when an if condition lacks a NOT variant.
• Only use { braces } for if conditions when you intend to execute more than one command if the condition is true. If you only have one command, do not use braces. Braces tell the CON compiler specifically to branch, which slows down your code a tiny fraction. Another if condition counts as one command.
  • The exception is that if you have an else with multiple non-braced conditions where it may be ambiguous, you need to add braces to ensure the else is used correctly.
• Because events can be defined multiple times in an additive fashion, keep separate instances in your own organization scheme based on what your events do. Writing a con file named events.con is HIGHLY discouraged.

Methodology

• Not all "temp" variables are created equal. Gamevars used only to perform a mathematical calculations and not to store values afterwards should be declared GLOBAL to save memory. Remember, the game VM that runs CON code will always be single-threaded by nature. If you are using a gamevar to store a value to be preserved between tics, simply to save it for use later, or for a construct like a counter, it should be declared PERACTOR.

Links

• full command list
  • alphabetized
  • categorized
• gamevars
• pre-defined gamevars
• constantly updated gamevars
• structure members
• event list
• screen drawing commands
• projectile information
• Tutorials