Build/Mapster32 Keyboard Commands

3D Mode: Mouse

The purpose of mouse in 3D mode is pointing at some objects in a map and looking around (F3 toggles mouse look).

Mouse pointer always points (see info about it at the bottom of the screen) at one of these objects:

1. wall
2. ceiling of sector
3. floor of sector
4. sprite
5. masked wall (non-transparent or semi-transparent wall between sectors)

It's important to understand this concept:
Some commands work differently depending on the current object (the object the mouse points at).
Some commands manipulate only the current object, some commands manipulate the selected (also called "highlighted") sprites/sectors in 2D mode, and some commands work globally.

Mouse buttons

LEFT lock the current object. The current object won't be changing as long as the button is pressed.
WHEEL change shade (+CTRL: in increments of 4)
WHEEL+ALT change visibility
LEFT+WHEEL change tile
RIGHT+WHEEL move object up/down
MIDDLE temporary mouse look (when not in UnrealEd-style mouse mode)

Additionally, there is UnrealEd-style mouse navigation in 3D mode (toggle it with F5), with the following bindings:
RIGHT mouse look
LEFT x: turning, y: move forward/back
LEFT+RIGHT x: strafe left/right, y: move up/down
MIDDLE y: move in viewing direction
The console variable pk_uedaccel changes the speed of navigation exponentially (valid values are 0-5).

It is possible to move around objects using the mouse and holding down specific modifier keys:
LEFT+ALT move object up/down (+CTRL: in larger increments)
LEFT+SHIFT move sprite in horizontal plane (+CTRL: grid-aligned)
The two preceding controls also work on a set of sprites highlighted in 2D mode.
LEFT+SHIFT pan ceiling/floor/wall texture
LEFT+CTRL scale wall texture or size of sprite
LEFT+CTRL change slope of floor/ceiling

3D Mode: Selecting Tile Mode

After pressing the V key in 3D mode, Mapster32 switches to "select tile" mode.

Keys

UP/DOWN/LEFT/RIGHT/PGUP/PGDN/HOME/END movements (CTRL modifies some commands)
KP / zoom in
KP * zoom out
Z toggle tile zoom

G goto specified tile
U goto start of user defined art (3584)
A goto start of Atomic edition's art (4096)
E goto start of extended art (6144,9216)

S Search for a named tile. When ^ is entered as the first character, anchor string at the beginning.

V select from all tiles
T select from pre-defined tile group which can be edited in tiles.cfg or added from within the tile selector. For this, press SPACE on the tiles to be grouped (CTRL-SPACE to select a range from starting from the last selection with SPACE). When you're ready, press Ctrl-G and you'll be queried for a group hotkey and name. The new tile group should now be saved persistently in tiles.cfg.

ESC cancel
ENTER accept

Mouse

LEFT select
CTRL+WHEEL zoom
WHEEL scroll
RIGHT smooth scrolling

3D Mode: Keys

UP move forward
DOWN move backward
LEFT+RCTRL move left
RIGHT+RCTRL move right
A move up
Z move down
+LSHIFT speed up movements

LEFT turn left
RIGHT turn right
A+CTRL look down
Z+CTRL look up

F1 toggle help
F3 toggle mouselook
F4 toggle ambience sounds
F5 toggle UnrealEd-style mouse navigation
F6 toggle automatic SECTOREFFECTOR help
F7 toggle automatic sector tag help
F9 load and activate/deactivate maphacks
F11 brightness
F12 screenshot
F12+SHIFT inverted screenshot

' V set sector visibility
; V set sector visibility on all selected sectors
V choose tile
3 toggle Sector over Sector. See documentation here: http://www.users.on.net/~triforce/cduke3d/
' BACKSPACE clear all flags for wall/sprite
BACKSPACE clear nextwall ("red wall") link for aimed at wall
' P paste palette to all selected sectors
; P paste palette to all selected sectors & sprites

S insert sprite
DEL delete sprite
, rotate sprite
. rotate sprite
< slowly rotate sprite
> slowly rotate sprite

. (period): search & fix panning of the wall to the right (, (comma): to the left), has 4 modifiers:
+CTRL: recurse nextwalls
+SHIFT: don't iterate point2's, i.e. affect only the immediate neighbor
+ALT: copy over pixel width
+' (quote): align immediate upper and lower TROR neighbors

SPACE lock to object (same as left mouse button)
PGUP/PGDN+ALT when aiming at red wall, select the floor or ceiling of the nextsector (useful for e.g. raising a lowered door when standing near it), depending on whether the aim is at the top or bottom of the wall

CAPS LOCK cycle zmode
' Z cycle zmode
' L change the coordinates of the current object
' M set the extra of the current object
1 toggle one sided sprite/wall
2 toggle bottom wall swapping
O set top or bottom orientation of wall
O ornament sprite onto wall
M toggle masking wall
H toggle hitscan sensitivity
H+SHIFT toggle one side hitscan sensitivity for the wall
' H set hitag of the current object

KP_MINUS shades down individual sector/wall/sprite or selected sectors
KP_MINUS+ALT decreases visibility of sector or selected sectors
KP_MINUS+ALT+SHIFT slowly decreases visibility of sector or selected sectors
KP_MINUS+ALT+CTRL decreases global visibility
KP_PLUS shades up individual sector/wall/sprite or selected sectors
KP_PLUS+ALT increases visibility of sector or selected sectors
KP_PLUS+ALT+SHIFT slowly increases visibility of sector or selected sectors
KP_PLUS+ALT+CTRL increases global visibility
Note: ALT, CTRL, SHIFT are modifiers so they work with mouse too.

PLUS/MINUS cycle tile
E toggle sector texture expansion
R toggle sector texture relativity alignment
R cycle sprite aligment between: wall aligned, floor aligned, view aligned
' R toggle framerate
F flip the current object (+SHIFT: reverse direction)
F+ALT set the first wall of sector

PAGE UP move up selected sprites or sectors
PAGE DN move down selected sprites or sectors
PAGE UP+CTRL put selected sprites on ceiling
PAGE DN+CTRL put selected sprites on ground
+CTRL speed up movement
+END slow down movement
+HOME slow down movement even more
Note: CTRL, HOME, END are modifiers so they work with mouse too.

N toggle 'no-autoshade'-bit of sprite
' I toggle sprite invisibility
' D cycle skill level
' X toggle sprite shade and SE light effect preview
' W toggle sprite display by class (no effectors/actors)
' Y toggle purple background
' C copy shade from the clipboard to all objects in the map which are the same tile as the tile of the object that in the clipboard. It works separately for sectors/walls/sprites depending on the current object. (I hope somebody who understands this, will clarify this)
' T set lotag
' H set hitag
' S set shade
G set picnum
B toggle blocking
B+SHIFT toggle one side blocking for the wall
T cycles translucence for sprites/masked walls (and ceilings/floors for ROR)

F2 toggle clipboard preview
F2+SHIFT toggle current sprite preview
TAB copy to the clipboard
LENTER+CTRL+SHIFT autoshade wall
' LENTER paste picnum only
; LENTER on ceilings/floors, auto-align with reference in TABbed clipboard (incomplete for relative-aligned references)
LENTER+SHIFT paste some visual (shading+pal) properties of the clipboard on sector/wall/sprite
LENTER+CTRL paste some visual (picnum+shading+pal) properties of the clipboard on sector/wall/sprite
LENTER paste all (picnum+shading+pal+flags+tags+extra) properties of the clipboard on sector/wall/sprite
Note: some fields are only pasted if the type of 'thing' in the clipboard (wall/sprite/sector) equals that of the aimed at object

C toggle center sprite
ALT+C replace all tiles in the map with one from the clipboard

' A toggle autosave. The interval is configurable (default: every 3 minutes)

' N toggle noclip for the camera
N+CTRL toggle noclip for sprites

[ slopes up fast
[+RSHIFT slope up with medium speed
[+LSHIFT slope up slowly
[+ALT align slope to the floor of adjoining sector
] slope down fast
]+RSHIFT slope down with medium speed
]+LSHIFT slope down slowly
]+ALT align slope to the ceiling of adjoining sector

KP_4 panning floor/ceiling horizontally
KP_6 panning floor/ceiling horizontally
KP_2 panning floor/ceiling vertically
KP_8 panning floor/ceiling vertically
KP_4 scaling wall/sprite horizontally
KP_6 scaling wall/sprite horizontally
KP_2 scaling wall/sprite vertically
KP_8 scaling wall/sprite vertically
+SHIFT or +ALT force panning (for walls); the latter is an alternative if Shift-KP5-KP*-combinations are dead.
+KP_5 speed up

/ Reset panning, repeat and flags to defaults
/+SHIFT set xrepeat to yrepeat (makes square)

P enable/disable parallax
P+CTRL change parallax type (works only in classic render, not saved into maps)
P+CTRL Playtest map from current position
P+ALT+CTRL Playtest map from start position
P+ALT change pal of sector/wall/sprite
D+ALT adjust clip distance of the sprite
RENTER switch to 2D mode

S+CTRL save map
L+CTRL load last saved map

ESC quit

2D Mode: Mouse

The purpose of mouse in 2D mode is pointing, selecting, moving object in a map.

Every time mouse is pointing at one of these:

1. Nothing
2. Sector
3. Sector and wall
4. Sector and sprite
5. Wall (wall without sector - map is corrupt)
6. Sprite (sprite without sector - map is corrupt)

Some commands work differently depending on the current object (the object the mouse points at).
To solve the ambiguity between sectors and walls/sprites, one usually must press ALT to work with walls/sprites instead of sectors.

RSHIFT (select vertices/sprites) modifiers

• ;: set difference
  
• ' (quote character): set union
  

(note that they have to be depressed when RSHIFT is released)

• RCTRL select only sprites (not walls)
• END select from all sectors, even grayed out ones

RALT (select sectors) modifiers

• ;: set difference
  
• ' (quote character): set union
  

(note that they have to be depressed when RALT is released)

• when RCTRL is pressed at RALT release time, then for a sector to be selected, it must be "inside" the mouse pointer instead of being surrounded by the rectangle
  
• when holding RSHIFT, will select all sectors, even grayed out ones
  

See the TROR section for HOME and END modifiers.

WHEEL zoom
WHEEL+ALT move camera and zoom
LEFT BUTTON drag sectors/vertices/sprites
RIGHT BUTTON move camera
RIGHT MIDDLE move camera

2D Mode: Keys

F1 show help
F2 show sound index
F3 enter/quit side-view mode
in side-view mode:

• Q, W: orbit around center
• A, Z: change azimuth
• MMB: change "player" z
• RMB: change "player" x/y

F4 toggle first wall preview
F5 show item count
F6 show actor count when pointed at wall
F6 show Sector Effector help when pointed at sprite
F7 edit sector data
F8 edit wall/sprite data
F9 show the Sector Tags help
F12 screenshot
F12+SHIFT inverted screenshot

SCROLL LOCK set starting position

LSHIFT show coordinates/linking sprites
LSHIFT+[, LSHIFT+] cycle linking sprites

LSHIFT+LMB (with RSHIFT-highlighted points) interactively scale highlighted points (+CTRL forces square aspect)
LSHIFT+RMB (with RSHIFT-highlighted points) interactively rotate highlighted points
If LSHIFT is released before the mouse button, the interactive scaling/rotation is canceled.

M set extra of sector
M+ALT set extra of wall/sprite
/ Reset panning, repeat and flags to defaults
/+SHIFT set xrepeat to yrepeat (makes square)

KP_4 scaling sprite horizontally
KP_6 scaling sprite horizontally
KP_2 scaling sprite vertically
KP_8 scaling sprite vertically
+KP_5 speed up

R cycle sprite alignment
' S set sprite size
' F function menu
F7+ALT search sector lotag
F8+ALT on wall: search wall lotag
F8+ALT on sprite: generic sprite search
[ search backward
] search forward
G cycle grid size
G+SHIFT cycle grid size backward
' L set sprite/wall coordinates
' 3 cycle modes of showing object's name
' 7 swap lotag and hitag of wall/sprite
' J jump to position of object (asks for sector/wall/sprite, or x,y)

[+ALT goto previous corruption
]+ALT goto next corruption

X flip selected sectors in x
Y flip selected sectors in y
X+ALT mirror selected sectors in x
Y+ALT mirror selected sectors in y

B toggle blocking
B+SHIFT toggle one side blocking for wall
F+ALT set the first wall of sector
O ornament sprite onto wall

, rotate sprite/selected sectors
. rotate sprite/selected sectors
< [i.e. ,+SHIFT] slowly rotate sprite/selected sectors
> [i.e. .+SHIFT] slowly rotate sprite/selected sectors
,+ALT, .+ALT rotate highlighted sectors by a manually entered angle

T set sector lotag
T+ALT set wall/sprite lotag
T+CTRL toggle show tags

H set sector hitag
H+ALT set wall/sprite hitag
H+CTRL toggle hitscan sensitivity
H+CTRL+SHIFT toggle hitscan sensitivity

P set sector pal
E set sprite status list
TAB show sector data
TAB+SHIFT show wall/sprite data
TAB+CTRL enable/disable filling of aimed-at sector

LCTRL+RSHIFT select all walls of the current sector (point at a wall and holding LCTRL, press and release RSHIFT). Set ops (see RSHIFT above) work too.
A zoom in
Z zoom out
L toggle grid lock
J join sectors
S insert sprite, pressing a key from 1 to 0 on the upper row before pressing S will make the inserted sprite's picnum be 1 to 10, respectively
S+ALT make inner sector
C duplicate sectors/sprites
C start circle attached to a wall
KP + increase amount of walls in circle
KP - decrease amount of walls in circle

SPACE start/end drawing of sector, end drawing of circle
LENTER when having some walls drawn, insert points at intersections with existing walls; clear drawn walls then
LENTER check nextwall pointer for the highlighted line
LENTER when having drawn some walls, batch-insert points where the drawn lines intersect with non-grayed-out walls
LSHIFT+LCTRL+LENTER check ALL pointers (manual attempt to recover map)
BACKSPACE remove the last wall during drawing sector
DEL delete sprite
DEL+CTRL delete sector
DEL+CTRL+LShift delete highlighted sectors
INS duplicate sectors/sprites
INS start circle attached to a wall
INS add vertex to wall
RENTER switch to 3D mode
ESC menu

' A toggle autosave(every 3 minutes)
' N toggle noclip
S+CTRL save map
L+CTRL load map

P+CTRL Playtest map from current position
P+CTRL+ALT Playtest map from start position

R+CTRL manual grayout: if some sectors are highlighted, make the editable z range [min ceiling z, max floor z] of those; else reset z limits

TROR related keys

2D mode

E+CTRL sector extension prompt (sectors to extend must be highlighted)
E+CTRL make sandwich [needs better explanation]
E+CTRL punch loop through extension (loop points must be highlighted, e.g. with RSHIFT+LCTRL)

A+CTRL toggle auto-grayout of non-extended sectors
J+CTRL TROR-join sectors. The selection must consist of the two sets of sectors you wish to join.
U+CTRL Clear extension: delete the bunch (i.e. ceiling-floor connection) of the aimed-at sector's floor
PGUP/PGDN Change 'player' height in discrete steps in order to go through the different levels
TAB+CTRL Display one currently aimed at sector (of potentially many that lie under the mouse crosshair)
HOME and END (as modifiers to RALT): select all sectors whose floor's/ceiling's bunchnum equal the bunchnum of the aimed at sector (useful for further operations on whole bunches)

3D mode

I invisibility preview: toggle fake ROR texture on non-masked portals
LENTER+CTRL When aiming at an extended floor/ceiling, paste to all floors/ceilings of the bunch of the aimed at one
T, B and H work as with walls, though they set/toggle the bits only on one side

Some console commands/variables

See "help <console-command/var>" for help on a particular command/variable.

pk_quickmapcycling
pk_uedaccel
osd_tryscript
sideview_reversehorizrot
fixmaponsave_sprites
show_heightindicators
show_ambiencesounds
corruptcheck_noalreadyrefd
corruptcheck

Mapster32 keys as tables (unmaintained and obsolete)

Below are the Mapster32 keys as three sortable tables. They are sorted such that the more 'basic' keys are at the top.

The column headers have the following meaning:

key/keys: self-explanatory. Where a key starts with a '+' on a line of its own,
    it means that it should be pressed simultaneously with the first one in the same table row.
type: type of command: info=informational, edit=editing, navi=navigation, disp=display, misc=miscellany
sec, spr,wal: in case of an editing command, whether it potentially acts on sectors, sprites, and/or walls.
adv: whether the command is 'advanced'. This is set somewhat arbitrarily.
new: whether the functionality of the command is new to Mapster32. An e means that it's enhanced from BUILD.
N: a running number. To restore the original order, sort by it.

Mapster 32 keys — shared keys for 2D and 3D mode

key/keys	description	type	sec	spr	wal	adv	new	N
F1	help	info				n	y	0
UP/DOWN LEFT/RIGHT   +LShift	move forward/back turn left/right (+RCtrl: strafe) speed up movements	navi				n	n	1
RENTER	toggle between 2D and 3D modes	misc				n	n	2
B	toggle blocking of wall/sprite (+Shift: one-sided)	edit		x	x	n	n	3
R	cycle sprite aligment	edit		x		n	n	4
,/.	rotate sprite (+Shift: slowly)	edit		x		n	n	5
DEL	delete sprite	edit		x		n	n	6
/	reset panning, repeat and flags	edit		x	x	n	n	7
Alt+F	set first wall of sector	edit	x			n	n	8
/+Shift	set xrepeat to yrepeat (make square)	edit		x		y	y	9
\'N	toggle camera clipping	navi				y	y	10
Ctrl+N	toggle sprite clipping through floors/ceilings	edit				y	y	11
\'A	toggle autosave (interval configurable in mapster32.cfg)	misc				y	y	12
(Shift+)F12	capture (inverted) screenshot	misc				n	n	13
Ctrl+L	load map	misc				n	n	14
Ctrl+S	save map	misc				n	n	15
Ctrl+P	playtest map from current position	misc				n	y	16
Ctrl+Alt+P	playtest map from starting position	misc				n	y	17

Mapster 32 keys — 2D mode

key/keys	description	type	sec	spr	wal	adv	new	N
A/Z	zoom in/out	disp				n	n	0
L	toggle grid lock	edit				n	n	1
G (+Shift)	cycle grid size (backwards), set auto grid	edit				n	e	2
S	insert sprite (prefix 1-0 on upper row: set picnum to 1-10, resp.)	edit				n	e	3
O	ornament sprite onto wall	edit		x		n	n	4
J	join sectors	edit	x			n	n	5
P	set sector pal	edit	x			n	n	6
Ctrl+H	toggle hitscan sensitivity	edit		x	x	n	n	7
T (+Alt)	set lotag of sector (wall/sprite)	edit	x	x	x	n	n	8
H (+Alt)	set hitag of sector (wall/sprite)	edit	x	x	x	n	n	9
KP4/6/2/8	scale sprite (+KP5: speed up)	edit		x		n	n	10
SPACE	draw sector; end circle drawing	edit				n	n	11
BACKSPACE	remove last wall when drawing sector	edit				n	n	12
BACKSPACE	cycle 2D display mode (textured/non-textured)	disp				y	y	13
INS	add vertex to wall	edit			x	n	n	14
DEL+Ctrl	delete sector	edit	x			n	n	15
C KP+/KP-	start circle drawing from wall increase/decrease amount of walls in circle	edit			x	n	n	16
Alt+S	make sector from inner loop	edit				n	n	17
RShift    +;/'	select group of walls and sprites set difference/union	edit				n	n	18
RAlt    +;/'   +RCtrl	select group of sectors set difference/union point sector selection	edit				n	n	19
INS or C	duplicate selected sectors/sprites	edit				n	n	20
SCROLLLOCK	set starting position	edit				n	n	21
TAB	show sector data	info				n	n	22
TAB+Ctrl (or TAB+Shift)	show wall/sprite data	info				n	y	23
LShift	show coords	info				n	y	24
M (+Alt)	set extra of sector (wall/sprite)	edit	x	x	x	n	y	25
E	set sprite status list	edit		x		n	n	26
Ctrl+T	toggle show tags	disp				y	n	27
'3	cycle modes of showing object's name	disp				y	n	28
'7	swap lotag and hitag of wall/sprite	edit		x	x	y	y	29
'J	jump to position (X,Y)	misc				y	y	30
'S	set sprite size	edit		x		y	y	31
'L	set wall/sprite coordinates	edit		x	x	y	y	32
'F	Special functions menu Replace invalid tiles Delete all spr of tile # Set map sky shade Set map sky height Global Z coord shift Resize selection Global shade divide Global visibility divide	edit				y	y	33
X/Y (+Alt)	flip (mirror) selected sectors in x/y	edit	x			y	y	34
F2	show sound index (root CON file to fetch sound definitions from can be specified at startup; default is GAME.CON)	info				y	y	35
F4	toggle first wall highlighting	disp				y	y	36
F5	show item count	info				y	n	37
F6	show actor count (when pointed at sprite: SE help)	info				y	n	38
F7	edit sector data	edit	x			y	y	39
F8	edit wall/sprite data	edit		x	x	y	y	40
F9	show ST help	info				y	n	41
Alt+F7	search sector by tag	info				y	n	42
Alt+F8	search wall by tag/search sprite	info				y	e	43
]/[	search forward/backward	info				y	n	44
LCtrl+RShift	select all walls of current sector (point at a wall and holding LCtrl, press RShift)	edit				y	y	45
LENTER	check pointers for current sector (+LCtrl+LShift: check ALL pointers)	edit				y	n	46

Mapster 32 keys — 3D mode

key/keys	description	type	sec	spr	wal	adv	new	N
A/Z   +Ctrl   +LShift	move up/down look down/up speed up movements	navi				n	n	0
CAPSLOCK or 'Z	cycle zmode	navi				n	n	1
KP+/KP-	change shade	edit	x	x	x	n	n	2
KP+/KP-+Alt   +Alt+Shift   +Ctrl+Alt	change visibility change visibility in smaller increments change global visibility	edit	x			n	n	3
]/[   +RShift   +LShift	slope down/up smaller increments smallest increments	edit	x			n	n	4
[+Alt	align slope to floor of adjoining sector	edit	x			n	n	5
]+Alt	align slope to ceiling of adjoining sector	edit	x			n	n	6
PGUP/PGDN   +END   +HOME	move object up/down (+Ctrl on sectors: 4x) 1/2 of normal increments 1/4 of normal increments	edit	x	x		n	n	7
PGUP+Ctrl	put sprite on ceiling	edit		x		n	n	8
PGDN+Ctrl	put sprite on ground	edit		x		n	n	9
KP4/6/2/8   +Shift or +Alt   +KP5	pan floor/ceiling or scale wall/sprite force panning speed up	edit	x	x	x	n	n	10
V	choose tile	edit	x	x	x	n	n	11
S	insert sprite	edit				n	n	12
G	set picnum	edit	x	x	x	n	y	13
E	toggle sector texture expansion	edit	x			n	n	14
F	flip texture	edit	x	x	x	n	n	15
R	toggle sector texture relativity	edit	x			n	n	16
'T	set lotag	edit	x	x	x	n	n	17
'H	set hitag	edit	x	x	x	n	n	18
'S	set shade	edit	x	x	x	n	n	19
Alt+P	set pal	edit	x	x	x	n	n	20
1	toggle one sided sprite/wall	edit		x	x	n	n	21
2	toggle bottom wall swapping	edit			x	n	n	22
M	toggle masking wall	edit			x	n	n	23
O	toggle wall orientation	edit			x	n	n	24
O	ornament sprite onto wall	edit	x			n	n	25
C	toggle sprite centering	edit		x		n	n	26
H	toggle hitscan sensitivity (+Shift: one-sided)	edit		x	x	n	n	27
T	cycle translucence	edit		x	x	n	n	28
P	toggle parallax	edit	x			n	n	29
'V	set sector visibility	edit	x			n	n	30
Ctrl+P (obsolete)	change parallax type (classic renderer only)	edit				n	n	31
.	search & fix panning of the wall to the right	edit			x	n	n	32
'L	set coordinates	edit	x	x		n	y	33
'M	set extra	edit	x	x	x	n	y	34
+/-	cycle tile	edit	x	x	x	n	y	35
TAB	copy to clipboard	edit				n	n	36
LENTER	paste all (pic+shade+pal+flags+tags+extra)	edit	x	x	x	n	n	37
'LENTER	paste picnum only	edit	x	x	x	y	n	38
LENTER+Shift	paste shading+pal	edit	x	x	x	y	n	39
LENTER+Ctrl	paste picnum+shading+pal	edit	x	x	x	y	n	40
Alt+C	replace all "same" tiles with clipboard tile	edit	x	x	x	y	n	41
Alt+D	adjust clipping distance of sprite	edit		x		y	n	42
;V	set sector visibility on all selected sectors	edit	x			y	y	43
3	toggle Sector over Sector (see http://www.users.on.net/~triforce/cduke3d/)	disp				y	y	44
'BACKSPACE	clear all flags for wall/sprite	edit		x	x	y	y	45
'P	set palette of all sprites/walls/floors/ceilings (respectively) in all selected sectors	edit	x	x	x	y	y	46
;P	set palette of all sprites/walls/floors/ceilings in all selected sectors	edit	x	x	x	y	y	47
Ctrl+Shift +LENTER	autoshade wall	edit			x	y	n	48
F2	toggle clipboard preview	info				y	y	49
F2+Shift	toggle current tile display	info				y	y	50
F3	toggle mouselook	misc				y	y	51
F4	toggle ambient sounds	misc				y	y	52
F5	toggle mouse navigation	navi				y	y	53
F6	toggle automatic SE help	info				y	y	54
F7	toggle automatic ST help	info				y	y	55
F9	reload and activate maphacks	disp				y	y	56
F10	disable maphacks	disp				y	y	57
F11	cycle brightness	misc				n	n	58
'D	cycle skill level	disp				y	n	59
'X	toggle sprite shade preview	disp				y	y	60
'W	toggle sprite display	disp				y	n	61
'Y	toggle purple background	disp				y	n	62
'C	copy shade from clipboard to all "same" objects	edit				y	n	63
'R	toggle framerate display	info				y	n	64
Ctrl+T	when pointing on a letter sprite: text entry tool (alphabets are configurable in tiles.cfg)	edit				y	y	65