Scripting
Scripting · Full command list (alphabetized · categorized) · Event list · Structure members
About This Guide
Intro
This guide will get you started with the basic aspects of EDuke32's commands -- those which set it apart from vanilla DN3D. This guide assumes both that the reader comprehends and understands the basic CON system as was seen in Duke Nukem 3D 1.3D/1.5, and that the reader is familiar with a few basic programming concepts.
CON Basics
If you are not already familiar with the default commands, the authors of this guide recommend the following guide, imported into the EDukeWiki for your convenience:
Another good source of basic information is the following FAQ:
Gamevars
Overview
Gamevars were introduced in WWII GI and remain the single most important aspect of the new commandset. Everything that sets EDuke32 scripting apart from regular Duke Nukem 3D scripting revolves around gamevars. Gamevars work similarly to integer variables in various programming languages, allowing the user to store, manipulate, and compare various information. Prior to gamevars, the only usable alternatives were manipulations of inventory item counters and move commands.
Types
There are three basic types of gamevar, each type storing a signed 32-bit fixed-point integer. The three basic types are as follows:
- Global variable: If a variable is declared as global, there is only one copy of it which may be accessed by any actor in the game.
For example:
gamevar shots_fired 0 0 // gamevar declarations must not occur inside states, events, or actor code
This line tells the game to create a variable named "shots_fired" which is initialized to 0. But wait -- what's the second 0 for? If you're asking yourself this question, go back and read the actual page on gamevars. Now that you know that gamevars have flags which must be declared along with the var's name and value, let's continue.
So, we've created a gamevar. Now what? For this example, we'll find the places in the GAME.CON code where the command "shoot SHOTSPARK1" occurs, and in each instance add the line "addvar shots_fired 1", so that in each case it looks like this:
shoot SHOTSPARK1 addvar shots_fired 1 // increments the counter
This will make the shots_fired var increment each time an enemy fires a SHOTSPARK1 projectile.
- Per-player variable: If a variable is declared as per-player, there is one copy of it for each player in the game, meaning that the variable is set independently for each player. If a player performs an action that triggers a per-player variable change within an event or the APLAYER actor code, it will only change for the player that initiated that action. If an actor changes a per-player variable, it will change for the closest player to the actor what changed it. You can use the setplayervar command to set a per-player var for a particular player who is not the closest one, but this is only necessary in multiplayer games (and even then it is seldom necessary). In single player games, there is little practical difference between a global gamevar and a per-player variable.
- Per-actor variable: If a variable is declared as per-actor, then there is separate copy of it for each sprite in the game. That means that every monster, projectile, player, decorative sprite -- pretty much anything in the game that isn't a wall or sector -- has its own copy of the variable. This is useful if you want to have actors other than the player store information for more than one tick. For example, suppose you want each monster to keep track of how many bullets it has fired:
gamevar shots_fired 0 2
This line tells the game that there is a variable named "shots_fired" which is initialized to 0 ( the 0 ) and is per-actor( the 2 ). With the gamevar declared, you could then add code to the monsters to increment the var when firing shots (just like in the example above for global gamevars). Since the gamevar is per-actor, the same code would now increment the variable separately for each monster.
There are also some pre-defined gamevars and special constantly updated gamevars which should only be used in certain ways.
Use and manipulation
Custom variables, or "gamevars" are declared with the gamevar command.
The syntax for defining a gamevar is:
- gamevar <varname> <value> <flags>
You may use upper or lowercase letters for <varname>. EDuke32 is case-sensitive, so a var named "EXAMPLE1" is different from "example1." Variable names should not begin with a digit.
The <value> of the gamevar may be positive or negative and must be a whole number.
The <flags> may be set to either 0 (global), 1 (per-player), or 2 (per-actor).
Manipulation of gamevars is accomplished by using a variety of commands that range in functionality from simple mathematical functions to grabbing internal values for manipulation in the CONs. Here are a few of the more common variable manipulation primitives:
- setvar, setvarvar
- addvar, addvarvar
- subvar, subvarvar
- mulvar, mulvarvar
- divvar, divvarvar
- randvar, randvarvar
And some of the more rarely used ones:
To test the values of gamevars, the following commands are used:
A complete list of primitives is available here. The importance of manipulating gamevars will become clear when we get to talking about getting and setting the members of the various structures in the game. All commands which accept read-only gamevars will also accept constants in place of them.
Members of game structures
Overview
full list of structure members EDuke32, like prior EDuke iterations, gives you access to game structures--basic elements of the game such as the player, sprites, walls, and sectors--and their predefined property variables, or members. There are many different structures which can be accessed, and a list of the common ones can be found here.
Player
members of the player structure The members of the player structure are controlled using the getplayer and setplayer commands. The player structure members deal with properties unique to the player which are not shared with other actors. These include variables associated to the players weapons, inventory items, special animations, jumping counters, etc. See the complete list of members of the player structure for details. This example shows how to get a member of the player structure into a variable, check its value, then alter a member of the player structure accordingly.
Actor / Sprite
Members of the sprite and hittype structures Objects in the game world, such as monsters, missiles, bits of debris, and so on, are referred to as "sprites" (because they are typically rendered as 2D pictures). Sprites that execute code are usually referred to as "actors". Every sprite has its own data structure containing all of the member elements in the list linked to above. Various original CON commands, such as "cstat", "spritepal", "sizeat", etc. work by changing values in the sprite structure of the actor executing the command. These structure members can be modified directly in an EDuke32 script by using the setactor command. Commands like setactor enable us to modify every member of the structure, even those that could not be accessed with the original scripting system. See getactor and setactor to see how these commands are used.
Sector
Members of the sector structure
Wall
Game configuration
Members of the userdef structure
Player input
Members of the input structure
Events
Overview
EDuke32 provides both an object-oriented and an event-oriented interface to the game's internal workings. As you already know, the object-oriented part of Duke is the actor system -- in contrast to that, we'll be talking about the event-oriented portion in this section. As the name suggests, an event is a block of code that is triggered when a certain event in the game happens. Events in the game are triggered internally whenever a certain point in the code is reached.
Events are a key component in the manipulation of the game. Using events, we can do a variety of things such as intercept keypresses, draw to the screen (more on this later), redefine what a player does when certain actions are executed, et cetera.
Event use
Using an event is very easy — similar to the actor or state primitives, onevent is the primitive used to start the definition of a block of code to be associated with one of the events. Furthering the similarity, onevent must be terminated by the equivalent of an enda or an ends, an endevent.
The following example of event code will cause the player to have a full first aid kit every time the inventory is reset (e.g. when the player starts a game):
onevent EVENT_RESETINVENTORY setplayer[THISACTOR].firstaid_amount 100 endevent
A note on synchronization
Events introduce the ability for CON code to be run in a manner that isn't synchronized. For example, display events may run a different number of times on each individual system in multiplayer. If you want your mod to function properly in multiplayer, it is very important to note whether an event is synchronized or not. Typically, you'll just want to avoid doing anything that changes the game state (including ifrnd and randvar) in display code.
Drawing to the screen
The ability to properly draw to the screen is a huge improvement over the hackish abominations involving quotes and unused characters that we were forced to endure when using 1.3d and 1.5. There are several different drawing commands available, ranging in functionality from drawing graphics to the screen to printing text stored in quotes (see the section on string manipulation for more information).
Drawing commands
- rotatesprite
- gametext
- minitext
- digitalnumber
- myos (deprecated)
- myospal (deprecated)
- myosx (deprecated)
- myospalx (deprecated)
Changing the rendering properties of a sprite in the world
Members of the tsprite structure
Custom projectiles
Overview
EDuke32 adds the ability to create new projectiles in addition to the default types. A few basic types exist (shorthand: melee, bullet, and slow projectile) which can be used to create a nearly infinite variety of weapon types and even some entirely new effects, such as new types of debris, gibs, clouds of billowing smoke, et cetera.
Defining custom projectiles
Projectiles are defined via the defineprojectile command. The syntax for this command is:
defineprojectile <tilenum> <function> <value>
Before using this command list of defines should be created:
define PROJ_WORKSLIKE 1 define PROJ_SPAWNS 2 define PROJ_SXREPEAT 3 define PROJ_SYREPEAT 4 define PROJ_SOUND 5 define PROJ_ISOUND 6 define PROJ_VEL 7 define PROJ_EXTRA 8 define PROJ_DECAL 9 define PROJ_TRAIL 10 define PROJ_TXREPEAT 11 define PROJ_TYREPEAT 12 define PROJ_TOFFSET 13 define PROJ_TNUM 14 define PROJ_DROP 15 define PROJ_CSTAT 16 define PROJ_CLIPDIST 17 define PROJ_SHADE 18 define PROJ_XREPEAT 19 define PROJ_YREPEAT 20 define PROJ_PAL 21 define PROJ_EXTRA_RAND 22 define PROJ_HITRADIUS 23 define PROJ_VEL_MULT 24 define PROJ_OFFSET 25 define PROJ_BOUNCES 26 define PROJ_BSOUND 27 define PROJ_RANGE 28
These defines are used to fill the <function> block of defineprojectile.
Manipulating custom projectiles mid-game
Members of the tsprite structure
String manipulation
Quote redefinition mid-game
redefinequote <quotenumber> <string> // sets the quote number <quotenumber>'s text to <string>
Copying and concatenation
qstrcpy <quotenumber1> <quotenumber2> // sets the text of <quotenumber1> to the text of <quotenumber2> qstrcat <quotenumber1> <quotenumber2> // adds the text of <quotenumber2> to the text of <quotenumber1>